Smart Home

Pairing Guide: Smart Universal Remote

Step 1: Select a spot in your room where you can power your Near remote which is within the line of sight of all the infra-red enabled devices you would like to control with your Near remote.

Step 2: Insert the USB cable of the Near remote into a USB plug and power on. 
(You can reuse your old, unused iPhone charging plug-top)

Step 3: Make sure that your smartphone is connected to your 2.4GHz Wi-Fi Network. 

Step 4: Tab on the "+" icon on the top right corner of the home page. 

Step 5: Tab on "others" and select "Universal Remote Control"

Step 6: Press and hold the button underneath the Near remote for 5 seconds until the blue light begins flashing (twice a second) to activate pairing mode. 

Step 7: Tab on "Confirm indicator rapidly blink", enter Wi-Fi password to begin device pairing. 

Step 8: Once the device is added successfully, rename your Near remote, select a room in your home to place it and you're set.

Reading next

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.